Megaphone Commons

{{last_updated_at}} by {{last_updated_by}}

# Microsoft Azure - Setup

## For the Client

Hi there!  If I've directed you to this page, the part that concerns you are the first two sections only.  It's a bit convoluted, so feel free to ask me if you run into trouble! -Jon

[**NOTE**: Most of Microsoft's pages break with an ad blocker enabled.]

### Get a Sponsorship

* [Go to the Nonprofit Microsoft Getting Started page](https://nonprofit.microsoft.com/en-us/getting-started).  Fill out the paperwork to be approved as a 501c3.  Approval can take 1 day or 3-4 weeks - I've seen both multiple times.

* Once approved, go to https://www.microsoft.com/en-us/nonprofits/azure to claim credits (or go directly to [Claiming Your Credits](https://nonprofit.microsoft.com/en-us/offers/azure).

* You'll know your successful because you'll see a sponsorship listed on the [Sponsorship Page](https://www.microsoftazuresponsorships.com/Balance).

### Create a Subscription

* Check that you have credits in your sponsored account: https://www.microsoftazuresponsorships.com/Balance

* Visit the [Azure Portal](https://portal.azure.com).  

* Click the **Subscriptions** icon.

* Click the **Add** button.

* Add a subscription of type "Microsoft Azure Sponsorship" from the Azure portal. You will likely need to select **Show other subscription types** to see it.

 * **Note**: Even sponsored subscriptions require a credit card, make sure you have one available.

## Technical Configuration

To set up a free account, you must:

* Get a Sponsorship (see above)

* Create a Subscription linked to the Sponsorship (see above)

* (Strongly recommended) Grant access to the subscription to other users.

* Create a Resource Group linked to the Subscription

* Create a Virtual Machine (and associated resources) linked to the Resource Group

### Grant access to other users

Microsoft logins now require 2-factor authentication, and the client owns the main account.  The web vendor (Megaphone Tech, presumably) needs separate logins.

[Source](https://docs.microsoft.com/en-us/azure/cost-management-billing/manage/add-change-subscription-administrator) for instructions

* Open the new subscription.

* Click **Access Control (IAM)** in the left navigation bar.

* Under *Grant access to this resource*, click **Add role assignments**.

* *Role* should be **Owner**.  In *Search by name or email address*, put the email of the new user and press **Save**.

At this point, they'll receive an email to either log in with an existing Microsoft account or to create a new one.  With the owner role, the rest of this setup can be done as easily from their account.

### Create a resource group

* Select "Resource Group" from the main Azure portal.  

* Select **Add** and give it a name.

* Your subscription should be pre-selected since you only have the one.

* Click **Review and Create**.

### Create a virtual machine

* Click on your new resource group in the Azure Portal.

* Click **Add**.

* Search for the name of the image you want (e.g. Debian).

* See the screenshots below for configuration of the "Basics" and "Disk" tabs.  The other tabs I keep with the defaults.

* I've attached a downloaded template for this VM, which as of now I haven't used yet, not sure how it works.

![Create a VM - Basics Tab](https://hq.megaphonetech.com/attachments/download/1771/Selection_999(010).png)

![Create a VM - Disks Tab](Selection_1016.png)

### Post-provisioning configuration

#### Partition and format the attached disk

Your VM (if it's D2s v3) will have an "OS disk" of 30GB it ships with.  Your attached disk is unformatted.  Partition and format the new disk with:

```shell

sudo parted --script -a optimal /dev/sdc mklabel gpt -- mkpart primary ext4 '0%' '100%'

sudo mkfs -t ext4 /dev/sdc1 

```

**NOTE** At different times, Azure may attach the disk as `/dev/sdb` or /dev/sdc`.  Use `fdisk -l` to determine the correct disk to work with.

#### Mount the attached disk

```shell

# install lsof and rsync

sudo apt install lsof rsync

# Ensure that no files are open in /var.

# This should come back empty:

sudo lsof | grep /var

sudo mount /dev/sdc1 /mnt

sudo rsync -va /var/* /mnt

sudo mv var var.old

sudo umount /mnt

sudo mkdir /var

sudo mount /dev/sdc1 /var

vi /etc/fstab

```

Add the following line to `/etc/fstab`:

```

/dev/sdc1       /var     ext4    defaults    0 0

```

#### Modify Firewall Rules

* Click on your new virtual machine in the Azure portal.

* Click **Networking** in the side navigation.

* You should see your firewall settings.  They should look like the screenshot below, except they'll be missing the two items circled.

* Add the "allow_ping" and "Port_5665" rules to the *Inbound Port Rules* as shown in the screenshot.

![Firewall Rules](https://hq.megaphonetech.com/attachments/download/1772/Selection_999(012).png)

#### Add a swapfile

[Complete instructions are here](https://support.microsoft.com/en-us/help/4010058/how-to-add-a-swap-file-in-linux-azure-virtual-machines) but in short, add this to `/etc/waagent.conf` for an 8GB swapfile:

```

    ResourceDisk.Format=y

    ResourceDisk.EnableSwap=y

    ResourceDisk.SwapSizeMB=8192

```

Then run `service walinuxagent restart`.